| PREVIOUS
|
Equipment Plans |
Manual extractors

Basket details



Simple smoker

Veil



Solar wax melter


A mixture of rain water or distilled water, detergent, honey
and alcohol. The mixture should not be bubby.
Note: minerals in the water will cause the wax to stick
Making starter strips with a dip board
![]() 1) Use a smooth, hardwood board. |
![]() 2) Wet the board with the wetting liquid |
![]() 3) Dip the board into hot wax. For thicker strips, dip the board several times |
![]() 4) When the wax hardens, peel it from the board, trim it, and cut it into 2 cm strips |
A mold for making wax foundation
| 1) put frame containing a sheet of foundation on board. | |
![]() |
2) Coat foundation with vegetable oil. |
![]() |
3) Pour in plaster of Paris and allow to harden. |
![]() |
4) Turn over and do the other side. |
![]() |
5) When the molds are hard, carefully separate them. Build a hinged frame (box) to hold the molds. |
Making wax foundation
![]() |
1) Brush the mold with the wetting liquid. |
![]() |
2) Pour melted wax in the center of the mold. |
![]() |
3) Remove the wax shett, rinse it off with cool water and tril it |
Note: melt the wax in a double boiler. Wax is flammable. Do not allow wax to boil, this will make it brittle